

Shown: Emtek Hammered Lever Satin Nickel US15
- Can be ordered with any Brass rosette
- Sold as complete set. Includes Latch and Strike Plate
- 28 Degree Latch is available for additional charge
- For pricing information, contact any Emtek® dealer
Available Functions
- Privacy
- Passage
- Dummy
Available Upgrades
- 28 Degree Latch
- Concealed Fastener (includes 28 degree latch)
- Fits any door between 1-3/8” to 2-1/4" thick with a 2-1/8" bore standard door prep*
- Standard latch is for 2-3/8" backset. Specify 2-3/4" backset if required
* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy
Specifications
- Emtek CF Mechanism 2.0 Passage & Privacy - Knob/Lever Installation Guide
- Emtek Passage, Privacy, Dummy - Wilshire Sideplate for Knob/Lever Installation Guide
- Emtek Passage, Privacy, Dummy - Knob/Lever Installation Guide
- Dust Box for Strike Plate
- Emtek Passage, Privacy, Pair Dummy and Single Sided Dummy - STRETTO 1.5x5 Knob/Lever Installation Guide
- Emtek Passage, Privacy, Dummy - STRETTO 1.5x5 Door Preparation (Left & Right Handing)
Arts & Crafts Collection
Named for the decorative and fine arts movement that began in Britain during the 1850s, Emtek's Arts & Crafts Collection includes hardware in the style of the American Craftsman architectural persuasion. This collection includes:
- Arts & Crafts Full Length and Monolithic Tubular Entry Sets
- Craftsman Full Length and Monolithic Mortise Entry Sets
- Arts & Crafts Keyed and Single-Sided Deadbolt
- Arts & Crafts Rectangular and Hammered Rosette
- Arts & Crafts Door Pull
- Arts & Crafts Lever
- Hammered Lever
- Hammered Egg Knob
- Hammered Oval Cabinet Pull
- Hammered Ring Pull and Hammered Vertical Ring Pull
- Hammered Bin Pull
- Hammered Cabinet Pull
- Round Dimpled and Square Dimpled Cabinet Knob
- Mortise & Tenon Cabinet Pull
UPGRADE WITH CONCEALED FASTENER 2.0
Our Concealed Fastener Mechanism provides a clean look with no visible screws on the interior rosette.
All CF Mechanism lever upgrades also include a 28 degree latch (vs the standard 45 degree latch), which requires less rotation to disengage the latch and open a door when compared to standard latches.
RIGHT OR LEFT HANDING?
To determine the handing of your door:
- Stand at the exterior side of the door in question, facing towards the inside.
- Take note of which side of the door the hinges are on.
- If the hinges are on the left side, then the door and the hardware should be left handed.
- If the hinges are on the right side, then the door and the hardware should be right handed.
Learn more about handing here:
RELATED PRODUCTS
{
"id": 378824,
"group": "ProductFamily",
"obj_type": null,
"primary_image": {
"title": "Emtek Hammered Lever Satin Nickel US15",
"image": "https://www.emtek.com/media/pim-images/1ae/08d152d736172ded47.jpg",
"asset_type": "Image-Primary"
},
"finish_images": null,
"option": "Hammered Leverset",
"pim_id": 427475,
"code": null,
"is_public": true,
"order": 5383,
"override_image": null,
"themes": [
1
],
"product_attribute_id": 476,
"title": "Hammered",
"images": [
{
"title": "Emtek Hammered Lever Satin Nickel US15",
"image": "https://www.emtek.com/media/pim-images/1ae/08d152d736172ded47.jpg",
"asset_type": "Image-Primary"
}
],
"description": "<li>Can be ordered with any Brass rosette</li>\n<li>Sold as complete set. Includes Latch and Strike Plate</li>\n<li>28 Degree Latch is available for additional charge</li>\n<li>For pricing information, contact any Emtek® dealer</li>",
"technical_specs": "<li>Fits any door between 1-3/8” to 2-1/4\" thick with a 2-1/8\" bore standard door prep*</li>\n<li>Standard latch is for 2-3/8\" backset. Specify 2-3/4\" backset if required</li>\n\n* STRETTO rosette requires a 1-1/4” diameter bore hole and 2-hole door preparation for thumbturn privacy",
"installation_instructions": [
{
"title": "Emtek CF Mechanism 2.0 Passage & Privacy - Knob/Lever Installation Guide",
"file": "https://www.emtek.com/media/documents/pim-documents/21b/53e9c1d98d33d314ab.pdf",
"asset_type": "Document-InstallationInstructions"
},
{
"title": "Emtek Passage, Privacy, Dummy - Wilshire Sideplate for Knob/Lever Installation Guide",
"file": "https://www.emtek.com/media/documents/pim-documents/1f3/b0d109a76a841a5591.pdf",
"asset_type": "Document-InstallationInstructions"
},
{
"title": "Emtek Passage, Privacy, Dummy - Knob/Lever Installation Guide",
"file": "https://www.emtek.com/media/documents/pim-documents/abd/b79f1763393de1ca01.pdf",
"asset_type": "Document-InstallationInstructions"
},
{
"title": "Dust Box for Strike Plate",
"file": "https://www.emtek.com/media/documents/pim-documents/467/0a0746b2722dde61c4.pdf",
"asset_type": "Document-InstallationInstructions"
},
{
"title": "Emtek Passage, Privacy, Pair Dummy and Single Sided Dummy - STRETTO 1.5x5 Knob/Lever Installation Guide",
"file": "https://www.emtek.com/media/documents/pim-documents/c57/00f7dc2914a7a00d9e.pdf",
"asset_type": "Document-InstallationInstructions"
}
],
"templates": [
{
"title": "Emtek Passage, Privacy, Dummy - STRETTO 1.5x5 Door Preparation (Left & Right Handing)",
"file": "https://www.emtek.com/media/documents/pim-documents/5d1/b3c063f7208125e095.pdf",
"asset_type": "Document-Template"
}
],
"specifications": [
{
"title": "Emtek Passage & Privacy Knobsets and Leversets Dimensions/Door Thickness Specifications",
"file": "https://www.emtek.com/media/documents/pim-documents/1a2/d346ec61d3d8271391.pdf",
"asset_type": "Document-Specifications"
},
{
"title": "Emtek Rosette Specifications",
"file": "https://www.emtek.com/media/documents/pim-documents/090/2fe70a6d2b0182c480.pdf",
"asset_type": "Document-Specifications"
},
{
"title": "Emtek STRETTO 1.5x5 Dimensions-Door Thickness Specifications",
"file": "https://www.emtek.com/media/documents/pim-documents/c32/2e881c8b9345e034c3.pdf",
"asset_type": "Document-Specifications"
},
{
"title": "Emtek Strike Plates for Keyed Passage & Privacy Specifications",
"file": "https://www.emtek.com/media/documents/pim-documents/9cb/2da97618042769a469.pdf",
"asset_type": "Document-Specifications"
}
],
"merchandising_tag": null,
"icons": [],
"functions": [
{
"id": 371413,
"option": "Privacy",
"obj_type": null,
"group": "Function",
"pim_id": 426148,
"code": null,
"finish_images": null,
"primary_image": {
"title": "Privacy Function",
"image": "https://www.emtek.com/media/original_images/Privacy_v3.jpg"
},
"function_modal": {
"title": "Privacy",
"image": {
"url": "https://www.emtek.com/media/original_images/Privacy_v3.jpg"
},
"description": "<ul><li data-block-key=\"hzi51\">An handle set with a locking mechanism</li><li data-block-key=\"a5qm8\">Usually in the form of a small push pin lock on the side of the knob or lever</li><li data-block-key=\"2pagm\">To be used with interior locksets only</li></ul><p data-block-key=\"bl6mc\"></p>"
}
},
{
"id": 371412,
"option": "Passage",
"obj_type": null,
"group": "Function",
"pim_id": 426147,
"code": null,
"finish_images": null,
"primary_image": {
"title": "Passage Function",
"image": "https://www.emtek.com/media/original_images/Passage_v3.jpg"
},
"function_modal": {
"title": "Passage",
"image": {
"url": "https://www.emtek.com/media/original_images/Passage_v3.jpg"
},
"description": "<ul><li data-block-key=\"utbfj\">A handle set without an internal locking mechanism</li><li data-block-key=\"1oqi5\">To be paired with a deadbolt for an exterior door, or on an interior door that doesn't require privacy<ul><li data-block-key=\"ak3uk\">For example: a walk-in linen closet, kid's room, etc</li></ul></li></ul><p data-block-key=\"7sg28\"></p>"
}
},
{
"id": 371299,
"option": "Dummy",
"obj_type": null,
"group": "Function",
"pim_id": 426146,
"code": null,
"finish_images": null,
"primary_image": {
"title": "Lever Knob Dummy",
"image": "https://www.emtek.com/media/original_images/Dummy_v3_R63ifZ7.jpg"
},
"function_modal": {
"title": "Dummy",
"image": {
"url": "https://www.emtek.com/media/original_images/Dummy_v3_R63ifZ7.jpg"
},
"description": "<ul><li data-block-key=\"c6gwo\">Dummy sets have no latch and require no bore hole</li><li data-block-key=\"ch29q\">Surface mounted to the door</li><li data-block-key=\"92k3u\">Often used in conjunction with a passage or privacy set for double or french doors<ul><li data-block-key=\"5jenq\">Acts as a jamb, with a strikeplate for the other door's latch to fit into</li></ul></li></ul>"
}
}
],
"upgrades": [
{
"id": 371452,
"option": "28 Degree Latch",
"obj_type": {
"id": 8,
"name": "Latch Upgrade",
"display_name": "Latch Upgrade"
},
"group": "Option",
"pim_id": 665413,
"code": null,
"finish_images": null,
"primary_image": null
},
{
"id": 371442,
"option": "Concealed Fastener (includes 28 degree latch)",
"obj_type": {
"id": 5,
"name": "Fastener Upgrade",
"display_name": "Fastener Upgrade"
},
"group": "Option",
"pim_id": 427494,
"code": null,
"finish_images": null,
"primary_image": null
}
],
"warnings": [
{
"id": 371338,
"option": "Proposition 65",
"obj_type": null,
"group": "Warning",
"pim_id": 68211,
"code": null,
"finish_images": null,
"primary_image": null
}
],
"finish_ids": [
371254,
371258,
371252,
371255
],
"configurator": [
{
"display_name": "Finishes",
"user_interface": "grid",
"options": [
{
"id": 371254,
"option": "Satin Nickel",
"obj_type": null,
"group": "Finish",
"pim_id": 296,
"code": "US15",
"finish_images": null,
"primary_image": {
"title": "US15 Finish",
"image": "https://www.emtek.com/media/pim-images/145/0d81f5c72af8aa15c2.jpg",
"asset_type": "Image-EmtekFinish"
},
"attribute": {
"id": 443,
"name": "Finishes",
"singular_name": "Finish",
"pim_id": 1066
}
},
{
"id": 371258,
"option": "Oil Rubbed Bronze",
"obj_type": null,
"group": "Finish",
"pim_id": 313,
"code": "US10B",
"finish_images": null,
"primary_image": {
"title": "US10B Finish",
"image": "https://www.emtek.com/media/pim-images/4df/4dbb8c7aee0fde274b.jpg",
"asset_type": "Image-EmtekFinish"
},
"attribute": {
"id": 443,
"name": "Finishes",
"singular_name": "Finish",
"pim_id": 1066
}
},
{
"id": 371252,
"option": "Unlacquered Brass",
"obj_type": null,
"group": "Finish",
"pim_id": 248671,
"code": "US3NL",
"finish_images": null,
"primary_image": {
"title": "US3NL Finish",
"image": "https://www.emtek.com/media/pim-images/5fe/44acb4f151f26026c2.jpg",
"asset_type": "Image-EmtekFinish"
},
"attribute": {
"id": 443,
"name": "Finishes",
"singular_name": "Finish",
"pim_id": 1066
}
},
{
"id": 371255,
"option": "Flat Black",
"obj_type": null,
"group": "Finish",
"pim_id": 299,
"code": "US19",
"finish_images": null,
"primary_image": {
"title": "US19 Finish",
"image": "https://www.emtek.com/media/pim-images/b27/ca015ef3678f1f5c46.jpg",
"asset_type": "Image-EmtekFinish"
},
"attribute": {
"id": 443,
"name": "Finishes",
"singular_name": "Finish",
"pim_id": 1066
}
}
]
},
{
"display_name": "Rosettes",
"user_interface": "grid",
"options": [
{
"id": 371434,
"option": "Wilshire Rosette",
"obj_type": {
"id": 19,
"name": "Rose",
"display_name": "Rose"
},
"group": "Trim",
"pim_id": 397713,
"code": null,
"finish_images": {
"371252": "https://www.emtek.com/media/pim-images/847/66fba25067afe9d8f3.jpg",
"371253": "https://www.emtek.com/media/pim-images/720/0e7d6430b41d34ce6b.jpg",
"371254": "https://www.emtek.com/media/pim-images/1a1/11654eb0a41cefe93b.jpg",
"371255": "https://www.emtek.com/media/pim-images/083/6fb2d369ea5d2fe32f.jpg",
"371256": "https://www.emtek.com/media/pim-images/ac4/2011df68ea08fb86fb.jpg",
"371257": "https://www.emtek.com/media/pim-images/b77/0743e71f176ae33243.jpg",
"371258": "https://www.emtek.com/media/pim-images/926/fdc63d209f06f89eec.jpg",
"371353": "https://www.emtek.com/media/pim-images/cb5/7eeebfc64225a0a496.jpg",
"371354": "https://www.emtek.com/media/pim-images/57a/390ff59522a8703355.jpg",
"371355": "https://www.emtek.com/media/pim-images/4e9/4fa8df5499d5f11ac9.jpg"
},
"primary_image": {
"title": "Emtek Wilshire Rosette Polished Nickel US14",
"image": "https://www.emtek.com/media/pim-images/720/0e7d6430b41d34ce6b.jpg",
"asset_type": "Image-Alternate"
},
"attribute": {
"id": 453,
"name": "Rosettes",
"singular_name": "Rosette",
"pim_id": 1196
}
},
{
"id": 371443,
"option": "Quincy Rosette",
"obj_type": {
"id": 19,
"name": "Rose",
"display_name": "Rose"
},
"group": "Trim",
"pim_id": 397712,
"code": null,
"finish_images": {
"371252": "https://www.emtek.com/media/pim-images/ae9/cb30894e4bbff8154d.jpg",
"371253": "https://www.emtek.com/media/pim-images/7ed/4c5aff6f1c735240a4.jpg",
"371254": "https://www.emtek.com/media/pim-images/a6f/d9d19aaf66d386aa6e.jpg",
"371255": "https://www.emtek.com/media/pim-images/aa4/8b7f57fcb022617bf6.jpg",
"371256": "https://www.emtek.com/media/pim-images/df9/47ba1bb4202e5d30ea.jpg",
"371257": "https://www.emtek.com/media/pim-images/da4/a4cf4a38df890f98f1.jpg",
"371258": "https://www.emtek.com/media/pim-images/66e/c2dcbb7449ff6c9cb3.jpg",
"371352": "https://www.emtek.com/media/pim-images/3d5/471e61ff3c11b4af04.jpg",
"371353": "https://www.emtek.com/media/pim-images/37e/6a3acd7f6693c68bdd.jpg",
"371355": "https://www.emtek.com/media/pim-images/ae4/1015297d3f19ef07f8.jpg",
"371487": "https://www.emtek.com/media/pim-images/ba2/77b1e88de5213f9da2.jpg",
"371488": "https://www.emtek.com/media/pim-images/981/77310ed97f4f46d27d.jpg"
},
"primary_image": {
"title": "Emtek Quincy Rosette Flat Black US19",
"image": "https://www.emtek.com/media/pim-images/aa4/8b7f57fcb022617bf6.jpg",
"asset_type": "Image-Alternate"
},
"attribute": {
"id": 453,
"name": "Rosettes",
"singular_name": "Rosette",
"pim_id": 1196
}
}
]
},
{
"display_name": "Functions",
"user_interface": null,
"options": [
{
"id": 371413,
"option": "Privacy",
"obj_type": null,
"group": "Function",
"pim_id": 426148,
"code": null,
"finish_images": null,
"primary_image": {
"title": "Privacy Function",
"image": "https://www.emtek.com/media/original_images/Privacy_v3.jpg"
},
"attribute": {
"id": 445,
"name": "Functions",
"singular_name": "Function",
"pim_id": 1029
}
},
{
"id": 371412,
"option": "Passage",
"obj_type": null,
"group": "Function",
"pim_id": 426147,
"code": null,
"finish_images": null,
"primary_image": {
"title": "Passage Function",
"image": "https://www.emtek.com/media/original_images/Passage_v3.jpg"
},
"attribute": {
"id": 445,
"name": "Functions",
"singular_name": "Function",
"pim_id": 1029
}
},
{
"id": 371299,
"option": "Dummy",
"obj_type": null,
"group": "Function",
"pim_id": 426146,
"code": null,
"finish_images": null,
"primary_image": {
"title": "Lever Knob Dummy",
"image": "https://www.emtek.com/media/original_images/Dummy_v3_R63ifZ7.jpg"
},
"attribute": {
"id": 445,
"name": "Functions",
"singular_name": "Function",
"pim_id": 1029
}
}
]
}
]
}